Roll Heat Shrinkable Polyethylene Shrink Wrap With 450mm - 1200mm Width
Supply Ability
Supply Ability:1000 Metric Ton/Metric Tons per Month
Packaging & Delivery
Packaging Details: Suspended Pallet Packing
Lead Time : About 7 - 15 days after confirmed the order
Port: Shanghai
1. Product Details Of PETG Shrink Film
While PETG is the most expensive and most heat resistant shrink sleeve material, they are the most scuff resistant, have a higher gloss, and also have a higher shrink percentage up to 75%. Additionally, PETG is pasteurisable, environmentally friendly and can be recycled, an often-sought feature in today's market.
2. Product Specifications Of PETG Shrink Film
1) 20 mic - 80 mic Thickness
2) 450mm - 1200mm Width
3) 2500m - 5000m Length
4) 70% - 78% shrinkage
5) Can provide free samples of 150m - 200m
3. Product Parameter Of PETG Shrink Film
| No | Test Item | UNIT | Standard | Test Result | Decide |
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified |
| 2 | Tensile Strength | (MD) | MPa | ≥42 | 65.8 | Qualified |
| (TD) | MPa | ≥142 | 231 |
| 3 | Elongation | (MD) | % | ≥300 | 591 | Qualified |
| (TD) | % | ≥35 | 55 |
| 4 | Elasticity Modulus | (MD) | MPa | ≥1500 | 3269 | Qualified |
| (TD) | MPa | ≥3000 | 7370 |
| 5 | Heat Shrinkage | (MD) | % | ≤5.0 | 2.3 | Qualified |
| (TD) | % | 70～80 | 78 |
| 6 | Haze | % | ≤7.0 | 2.2 | Qualified |
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified |
| 8 | Wetting Strength | mN/m | ≥38 | ≥38 | Qualified |
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified |
4. Application Of PETG Shrink Film
Shrink Sleeves are heavily used in the following major markets:
• Beverage
• Wine & Spirits
• Sports Drinks
• Food
• Dairy
• Personal Care
• Household Care
• Pharmaceutical
5. Advantages Of PETG Shrink Film
- Environmental protection: PETG can be repeated recycling and recovery of the cost is low; even if the trademarks used as energy sources will not produce any toxic gases when be burned, no pollution to the environment. PETGF heat shrink film makes a high gold content on re-use opposed to PVC heat shrink film.
- High contractility: Being used the special production process, PETGF heat shrink gets a relatively high shrinkage factor, its lateral direction shrinkage even up to 78%, and can make the mark achieve body-fitted on the containers in different shapes ( Even if the large difference sizes of a single container ) equably.
- Transparency: With the special chemical structure, PETGF heat shrink film has good transparency and gloss which determines the PETGF heat shrink film is easy colored, able to be produced into a lot of beautiful trademark.
6. Package Of PETG Shrink Film
7. Storage Of PETG Shrink Film
Store our PETG shrink films below 30℃ in its original packaging;
Avoid damages from direct sunlight, high moisture and falling down.
Shelf life: 6 months.
8. Production Lines Of PETG Shrink Film
9. FAQ Of PETG Shrink Film
1) Can I have a sample order?
Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
2) What is the lead time?
Sample needs about 7 days prepared; mass production time needs 15-25 days normally.
3) Do you have any MOQ limit?
Our MOQ is 1 ton
SeaPort: FOB Shanghai
4) What information should I let you know if I want to get a quotation?
The external size of your products (Thick x Width x Length x Shrinkage) and the quantity.
10. Workshop Of PETG Shrink Film
100,000 grade purification dust-free workshop
Constant temperature all the year around
Green pollution-free production environment
Product Tags:
|
|
Roll Heat Shrinkable Polyethylene Terephtalate Glycol Shrink Wrap 450mm - 1200mm Width Images
|
